钢衬塑储罐 (钢、网、塑三合一)是钢塑复合系列产品的精华。它采用特殊滚塑成型工艺。它是将钢网焊接于钢体表面，以纯聚乙烯（线性低密度聚乙烯LLDPE、高密度聚乙烯HDPE、聚四氟乙烯PTFE）为原料，采用滚塑工艺将钢板、钢网与塑料有机结合成一体。
Steel lined with plastic tank(steel plate, steel mesh, plastic combination) is the essence of steel plastic composite products. It adopts special rotational molding technology. The steel mesh was welded on the surface of steel plate, Pure plastic (LLDPE, HDPE, PTFE) as raw materials by rotational molding steel plate, steel mesh and plastic combined into a whole.
|
储罐形式 Tank type |
立式双椭封储罐 Double elliptical heads tank |
立式椭封锥底储罐 Cone bottom elliptical head tank |
平底锥顶(椭封)储罐 Flat bottom cone(elliptical) cover tank |
|
钢材选择 Steel option |
碳钢Q235B/Q345R/16Mn,不锈钢SS304/SS316 Carbon steel Q235B/Q345R/16Mn,stainless SS304/SS316 |
||
|
塑料选择 Plastic option |
线性低密度聚乙烯LLDPE、高密度聚乙烯HDPE、聚四氟乙烯PTFE |
||
|
适用压力（Mpa） Applicable pressure |
根据用户要求来确定 According to the specific requirement of users. |
||
|
最大工作温度（℃） Max working temperature |
90℃（LLDPE/HDPE）,120℃（PTFE） |
||
|
适用介质 Applicable medium |
纯水、液态食品、酸、碱、盐及部分有机溶剂，能耐一定浓度的盐酸、磷酸、等 Water,Liquid food,acid,alkali,salt and organic solvent, can a certain concentration of HCL, H2PO3, HF etc. |
||
|
容积 Effective Volume（m³） |
1~50m³ |
1~100m³ |
1~200m³~ |
|
扶手 Handrail |
* |
||
|
爬梯 Ladder |
* |
||
|
管口方位及大小 Nozzles position and size |
可根据用户需求决定Can be decided according to user needs |
||
|
表面处理 Surface treatment |
碳钢喷漆，不锈钢酸洗钝化。carbon steel spray paint，Stainless steel pickling passivation. |
||
注：
1、具体参数要求根据用户要求来确定。Note：The parameters determined according to the specific requirement of users.
2、”*”为根据用户要求来确定。"*" be according to the specific requirement of users.
无锡苏伊斯特工业机械有限公司
13812275288
suester@163.com